List Of Best Headphones For Mixing

Are you searching for the best headphones for mixing? Is the first thing we want to talk about is choosing the right best headphones for mixing and mastering? There are lots of headphones our expert use in the last few years. There are too many headphones on the market. Such as Sennheiser HD25-1 II, Audio-Technica ATH-M50x  and non-other than Technics RPDJ1210 Swig Arm. The earphones that you carry with you every day, put them in your bag, and bring them to the plane.

Best Mixing Headphones Beyerdynamic DT 770’s:

Beyerdynamic is closed-back headphone. Meaning there’s some plastic that surrounds the outer side of the headphone. The part that isn’t facing your ears. And this makes the best headphones for mixing great for recording and tracking.

Because when you put the headphones on. You don’t hear a lot of the sound kind of bleeding out of the headphones as if you would if you had an open-back pair of headphones. So when you’re recording or tracking and you have the headphones on and you’re singing along to a backing track.

There isn’t as much leakage that gets picked up by the mic. So if you plan on doing a lot of recording or tracking with your headphones we definitely recommend you look into closed-back headphones. They’ll be a lot more useful for you than open-back headphones, and these Beyerdynamics are certainly a great choice.

Beyerdynamic DT 770 PRO Studio Headphone comes in three separate impedance and they are all around the same price as well. The only other difference between them Beyerdynamic and those two models is the impedance. If you bought the higher impedance Beyerdynamic DT 770 PRO 250 Ohm Studio Headphone it’s exciting because you pick the good one. Also, you can find 2 more impedance and they are Beyerdynamic DT 770 PRO 80 Ohm Studio Headphone and Beyerdynamic DT 770 PRO 32 Ohm Studio Headphone they are mostly good also.

Sound Quality:

If you are an artist, producers, and recording Engineers this headphone is perfect for you even if you like to buy this headphone for casual listening with your Mobile end devices – smartphones/laptops. Every sound is very clear. They are well balanced, they build the stage well and sound quite smoothly.

• Appreciates good sound and yummy bass.
• The frequency response on them is very clear and neutral.
• very good for noise isolation.

Comfort:

Very large ear holes with velvet type pads with a soft touch. which you can use longtime in your ears. And it feels really very comfortable to wear this best headphone for mixing and mastering. If you need to change your earpads you can order any others ear pads for Beyerdynamic DT 770 PRO.

Headband: The robust spring steel headband ensures a comfortable and secure fit for the wearer.

Single-sided cable: Allows the DT 770 PRO to be put on and taken off frequently without cables getting in the way.

At the end of the little review, you can find out that what is the advantage or disadvantage of Beyerdynamic DT 770 PRO. If you are searching for the best headphones for mixing and mastering this headphone is perfect for you.

<<Check Price on Amazon>>

Best Mixing Headphones MDR7506:

Sony’s ever-popular MDR7506 is well known in the industry for its exceptional sound quality, and great isolation. They are also popular for their lightweight design. Making them great for long sessions in the best headphones for mixing in the studio. If you are searching for the Best Headphones Under $100 for mixing and mastering this is the best choice for you.

They have dual 40-millimeter drivers and weight 8.1 ounces without the cord. Attached to the left earphone is a 3 meter or 9.8 foot coiled cable. They fairly swivel to the side, only about 15 degrees, but each earphone rotates out. The Sony MDR7506 also fold up into a smaller travel-friendly footprint. While dubbed as over-ear, the drivers do touch your ears a little. They also rest a little tighter and heavier on the head than some other headphones, but you can still wear these all day without issue.

Sound Quality:

The 7506s are touted to cover from 10 to 20,000 Hertz which covers the entire spectrum of human hearing. They don’t have a bass booster response like you’ll get with your Beats or Bose, so you’ll hear the realistic frequencies of what was actually recorded.

• Enjoy crystal-clear highs, present mids, and an extended low-end, for accurate monitoring.
• Impedance 63 ohms, Power Handling Capacity 1000 MW.

Comfort:

The MDR-7506s feature a closed-ear design, which provides both comfort and outstanding reduction of external noises. Comfort is only enhanced by the generous headband padding. A 9.8-foot coiled cord provides more than enough slack for working in a studio without removing the phones, whether you’re the performer, the engineer, or both.

• They fairly swivel to the side, only about 15 degrees.
• The 7506s also fold up into a smaller travel-friendly footprint.
• Comfort is only enhanced by the generous headband padding

<<Check Price on Amazon>>

Best Mixing Headphones Sennheiser HD 600’s:

In the audiophile world, few names are more reputable than Sennheiser. Now, these are open-back headphones, so they’re not as isolated as the Beyerdynamics or other closed-back headphones. which actually gives them a flatter frequency response.

Great choice for people who are primarily going to be using the best headphones for mixing. Now the Best Sennheisers have a very detailed, balanced soundstage. So they don’t really overhype any specific area of the frequency spectrum. They have a lot less low end than the Razer Adaro headphones.

So if you’re looking for a more accurate representation of the sound then I think these are a great choice. But if you’re looking for something that’s really going to kind of hit you in the chest in terms of the low end, probably not the best choice for you. Now like the Beyerdynamic DT 770 PRO 250 Ohm Studio Headphone, the cable for these headphones ends in an eighth-inch plug. So depending on what you’re plugging them into, you may need an adapter – an eighth-inch to a quarter-inch adapter – luckily that’s also included with the headphones so you’re going to be set either way. You may just need to use that adapter. But the cool thing about these headphones is that the cable is actually detachable and replaceable.

Sound Quality:

The headphones have an impedance of 300 ohms. So using a good DAC that is short for a digital to analog converter and a good headphone amplifier is going to give you the best sound. Everything sounds very natural and clear.

• The HD600s provide a very flat sound signature.
• The bass response is superb, the mids and highs are perfect
• Neodymium ferrous magnet systems ensure optimum sensitivity and an excellent dynamic response
• 97 Sound pressure level (SPL)

Comfort:

Now we are going to say something about the comfort and fit of these headphones. If you chose the best headphones for mixing or mastering you need must comfortable headphones like Sennheiser HD 600. Because they have nice thick velour pads in the headband which give you more comfortable padding. And for this reason, you can wear these headphones all day long without any problem.

• Very easy to wear in a hot and humid climate.
• There is a 1/8 inch to 1/4 inch adapter included.
• No amp necessary.

<<Check Price on Amazon>>

Final Verdict

So you can use these best headphones for mixing and start producing better music today. But first be sure to grab the best mixing headphones and make better mixes. The perfect choice for professional engineers, musicians, and Best headphones for EDM.